The offline bundle updates an existing install. The Host Computer needs the one-command install once, with internet access.
Download the bundle
- On a computer with internet access, open the Axol releases page.
- Under Assets for the release you want, download
axol-offline-v<version>-linux-aarch64.tar. It is about 800 MB.
linux-aarch64 bundle is for the Jetson Host Computers that Axol supports. Don’t extract it.
Install from the control panel
- Bring the bundle to a computer on the robot’s network, for example on a USB drive.
- Open the control panel at
https://<host-ip>:8001and go to the Host Computer card. - On the Offline update line, press Install from file, then Choose file, and pick the
.tarfile. - Wait for the upload. If the connection drops, choose the same file again to continue where it stopped.
- The Host Computer checks the file. It installs only bundles signed by Almond, for this computer’s platform.
- Stop any running operation, then press Install update.
Install over SSH
Use this the first time, when the Host Computer runs a release without Install from file. You can also use it instead of the control panel.-
Copy the bundle to the Host Computer:
-
On the Host Computer, extract the bundle and run its installer:
axol service. You can delete the .tar file and the extracted folder afterwards.
If the install stops
The bundle doesn’t include the ZED SDK or Ubuntu packages. The install uses the copies already on the Host Computer. If an optional step needs something that isn’t there, the install finishes with a warning that names the step. Axol works without it.
